NetComm NTC-400 Series Quick Start Manual page 9

NTC-400 Series Router
Updating the APN
The default connection profiles for both SIM-A and SIM-B are configured for
automatic configuration. If you wish to configure the APN manually, navigate to
Basic Network > WAN & Uplink > WAN Interface IPv4 Network Status
> WAN-1 > Edit > Internet Setup > WAN-1 > Edit > Connection with
SIM-A / SIM B card, set Dial-Up Profile to "Manual-configuration" and enter
the APN into the APN field. Click the Save button to save your changes.
NOTE: SIM B is disabled on units purchased through Telstra. On these units,
configure the SIM card in slot A.
9