Bad Mark Recognition Teaching; Bad Mark Recognition; Flowchart Of Bad Mark Recognition Teaching - Panasonic KXF-293C Operating Instructions Manual

5-3

Bad Mark Recognition Teaching

5-3-1

Bad Mark Recognition

This machine has the function which skips dispensing only the bad block for a bad point on the
board. A bad block mark indicates it. Also, the bad board mark indicates that there is the bad block
mark on a board. Only the board with that mark is objected to detect the bad block mark.
5-3-2

Flowchart of Bad Mark Recognition Teaching

Entering board data
Entering block attribute data
Starting to teach
Selecting recognition mark
Setting lamp value
Recognition test
Printing teaching coordinates
Correcting board recognition data
End of teaching
293C-E-EMA05-A01-02
Recognition
Saving data
Entering bad board mark
position (coordinates)
Bad block mark position
Unnecessary in selecting automatic lamp setting
Unnecessary in using CAD data
5
Created by PT
Page 5-9