Table of Contents
Advertisement
3-3
Setting the Support Pins
TURN OFF THE POWER AND THE SERVO SWITCH BEFORE WORKING INSIDE
ACTIVE PART OF THE MACHINE FOR MACHINE SET-UP.
You will have serious injury if the machine is actuated.
M97E
When the board size and thickness are changed or when parts are mounted on the back of board,
adjust the support pin.
Carry out the automatic width adjustment of left and right board width conveyors
and board holder, before setting the support pins.
293C-E-EMA03-A01-01
WARNING
Supporter
1
. Move the support pin position de-
pending upon the board size.
• To support the whole board equally, set many
∗ Be careful not to make contact with the parts
07JEC5AA
NOTICE
support pins as possible.
on the back of board.
3
Page 3-7
Advertisement
Table of Contents
