Selecting Ref - Panasonic KXF-293C Operating Instructions Manual

4-3-1

Selecting REF

Basically, as the board recognition is carried out by the shape setting, only the shape set can be
selected.
293C-EEn-DmFd-002
293C-EEn-DmFdSs-001
293C-E-EMA04-A01-01
Board Recognition Data
1
. Press REF sel .
shape set (Auto
2
. Press
)
• shape set (Auto)
Basically, select this mode for the board
recognition.
The lamp value of camera is automatically set.
• shape set (Manual)
When the shape set (auto) can not be recog-
nized, this mode is selected.
The operator sets the lamp value of camera
manually.
3
. Enter data of the board recognition
mark.
• Color
Set the color, black or white, for judging the
shape in recognition.
• Shape
Select the corresponding shape.
• Size
Enter the size of selected shape, referring to
the figure.
4.
Press .
• The board recognition data screen reappears.
∗ If AB point , or AB points are selected, set
the point B in the same procedures.
shape set (Manu
or .
al)
Page 4-5
4