Mwl Query; Custom Id Download - Mortara ELI 280 User Manual

MWL Query

MWL query codes may uniquely identify a location or department. Query codes may be assigned to a staff member
or an electrocardiograph. Use the Query Code drop-down menu from the ECG Orders directory to select orders
specific to that query code or location.
Once a query code is selected it will serve as the default query code for that particular ELI 280, or until a different
selection is made. Select None to erase the last query code used.

Custom ID Download

Custom ID formats are uniquely defined by your facility's needs. This customized ECG header information is
designed in ELI Link or an E-Scribe system and downloaded to the ELI 280.
To download and set a Custom ID format:
1. Select
from the real-time display
2. Select Custom ID.
NOTE: Alternatively, select Advanced from the Configuration menu followed by selecting Custom ID.
(A password is required to enter Advanced settings. )
"Attempting Network Connection" will display followed by "Connected," and finally "Custom ID
3.
downloaded."
4. Select Done to return to the Configuration menu; select Done again to return to the real-time display.
5. The Custom ID is retained for all future ECGs until a different ID format is downloaded, or Short or Long
format is selected from the Settings menu located under System. The set Custom ID format will not be lost
due to power loss or failure, or when switching to a different ID format.
Set the ID format configuration to short, long, or custom depending on the facility's patient demographic-
6.
entry needs.
TIP: Upon Custom ID download, the ID format will assume the demographic layout as designed in
ELI Link or E-Scribe.
NOTE: The site number must be configured in the electrocardiograph and recognized as an established,
valid site number in ELI Link or E-Scribe before downloading the Custom ID.
TIP: Communication configuration parameters must be set before downloading the Custom ID from
ELI Link or E-Scribe.
.
ECG DIRECTORY
43