Super Circuits N8072 Quick Manual

4
Step

Enter the Main Page

Start
1
Open a new Internet Explorer window.
Enter the IP address and login
2
Enter the new IP address and key in the username
"root" and password "root".
● Enter the IP address that you have just set.
● When the login screen appears, key in root in the
User Name and Password fields. Click OK.
5
Step

Install Internet Explorer Active X Controller

Install ActiveX
1
When the username and password are confirmed, a
control setup screen pops up under the IE address bar.
Click "Install ActiveX Control" to install the controls.
● Click Install ActiveX Control
The security warning screen aps. Click Install.
2
The ActiveX Control is named ActiveX Control.
This software is well certified. You can use it without any
doubts on its validity.
Enter the control screen
3
You can enter the control screen when the username and
password are confirmed.

Camera operation and interface

3
When ActiveX Control is installed successfully, you can
see the camera image and interface.
● Select the HTTP mode if the image is disabled.
RMIM-01G06022 Ver:10
- Page 3 -
Quick Guide
N8072 Cube Network Camera