Table of Contents
Advertisement
1.0 IMPORTANT NOTES - CONTINUED
• From time to time, check the cord for damage. Never use the appliance if the cord or any
part of the appliance shows signs of damage.
• DO NOT run the mains cable under carpets, rugs etc.
• DO NOT cover or obstruct the heater in any way. Overheating will result if it is
accidentally covered.
• Never immerse the product in water or any other liquids.
• DO NOT use the appliance outdoors.
• Before cleaning the appliance, ensure it is unplugged from the power and that it is
completely cool.
• DO NOT clean the appliance with abrasive chemicals.
• Never use accessories that are not recommended or supplied by the manufacturer. It
could cause danger to the user or damage to the appliance.
• DO NOT insert or allow foreign objects to enter the inlet or outlet vents as this may
result in electric shock, fire or damage to the appliance.
• DO NOT install the fire using an extension cord.
• Unplug from the mains supply if the appliance is not to be used for long periods.
2.0 INSTALLATION REQUIREMENTS
The appliance is supplied with a pre-wired three pin plug (13 Amp fuse rated) and 1.8 metres of electrical cable. It is therefore
necessary for a suitable electrical socket to be located within this distance and be easily accessible.This appliance is designed to
be fixed to the wall, using the wall fixtures/fixings provided. DO NOT recess any part of appliance into the wall.This appliance
is suitable for installation in static holiday/park homes.
3.0 APPLIANCE DATA
Weight (kg):
Dimensions:
Supply Voltage and Rating Power:
Fuse Rating:
Heating Elements:
Lighting:
This fire is fitted with LED's (Light Emitting Diode) in place of conventional bulbs. LED's generate the same light levels as
conventional bulbs, but use a fraction of the energy consumed. LED's are maintenance free and will not require replacing during
the life of the product.
4.0 COMPONENT CHECKLIST
Quantity
1
1
2
2
2
5.0 SITE REQUIREMENTS
It should be noted that the appliance creates warm convected air currents.These currents move heat from the room
surroundings to, and up the wall surfaces adjacent to the heater.
Installing the heater next to these types of wall coverings or operating the heater where impurities in the air, (such as tobacco
smoke) exist, may slightly discolour wall finishing.
If the appliance is to be secure on a dry lined or timber framed construction then the integrity and ability of the wall to secure
the appliance must be confirmed. It is important in these circumstances that any vapour barrier and/or structural members of
the house frame are not damaged.
If you are unsure of the ability of the wall to secure the appliance and/or which type of wall fixing to use, you should take
professional advice and obtain the correct fixings. Alternatively, find a more suitable wall location.
36kg
H 920 x W 1140 x D 330 (mm)
220-240V AC, 50Hz 1500W
13 Amp
1500W
LED
Description
Fire suite
Remote control handset
Wall plugs
Washers
Fixing screws
3
©
2015 Focal Point Fires plc.
Advertisement
Table of Contents
