Advertisement
Quick Links
LED ELECTRIC FIRE
Rivenhall White - DS-EHS01-41E
Rivenhall Black - DS-EHS01-39E
Focal Point Fires Ltd.
RBK House, Irishtown, Athlone,
Co. Westmeath, N37 XP52, Ireland
Tel: 01202 499330
Fax: 01202 499326
www.focalpointfires.co.uk
e: sales@focalpointfires.co.uk
MODELS SHOWN: RIVENHALL LED ELECTRIC
Revision A-07/21
2021
Advertisement
Related Manuals for FocalPoint DS-EHS01-41E
Summary of Contents for FocalPoint DS-EHS01-41E
- Page 1 LED ELECTRIC FIRE Rivenhall White - DS-EHS01-41E Rivenhall Black - DS-EHS01-39E Focal Point Fires Ltd. RBK House, Irishtown, Athlone, Co. Westmeath, N37 XP52, Ireland Tel: 01202 499330 Fax: 01202 499326 www.focalpointfires.co.uk e: sales@focalpointfires.co.uk MODELS SHOWN: RIVENHALL LED ELECTRIC Revision A-07/21...
- Page 2 2021...
- Page 3 1.80 22.4 kg H600x W1000 x D265(mm) RIVENHALL WHITE - DS-EHS01-41E RIVENHALL BLACK - DS-EHS01-39E 2021...
- Page 4 Heater unit Fixing brackets Wall fixing screw Wall plugs Firebox screws It should be noted that the appliance creates warm convected air currents. These currents move heat from the room surroundings to, and up the wall surfaces adjacent to the heater. Installing the heater next to these types of wall coverings or operating the heater where impurities in the air ,(such as tobacco smoke) exist, may slightly discolour wall finishing.
- Page 5 2021...
- Page 6 Installing the appliance onto the wall. Please note: Before drilling into walls, always check that there are no hidden wires, pipes, etc.Make sure that screws and wall plugs supplied are suitable for 4x30mm x 7pcs supporting the unit in your surface. Consult a qualified person if you are not 6mm x 7pcs sure.
- Page 7 LED Display Up Selection Fire ON/OFF Date Time Setting Clear button Timer Set “+” Selection “-” Selection Down Selection Downlights DOWN Open Window/Door detection LIGHT Flame Effect Heat II Heat I Timer ON/OFF Before using any operation with the remote control, Insert 2 x AAA batteries to the back of the remote control. The remote control will not respond until the digital display is illuminated as it is in sleep mode.Before operating , press any button once to illuminate the digital display in order to activate the remote control.
-
Page 8: Safety Cutout System
Setting the Heat Timer TIMER SET Press the “ ” button on the remote control, the time cycle number will flash. Use the “ ” and “ ” buttons to cycle TIMER SET through the different timer cycles from 1 to 10 and press the “ ”... - Page 9 2021...
- Page 10 2021...
Need help?
Do you have a question about the DS-EHS01-41E and is the answer not in the manual?
Questions and answers