Maintenance And Care; Cleaning The Drip Tray And The Coffee Grounds Container; Cleaning The Water Tank; Cleaning The Bean Hopper - Saeco Incanto HD8911/47 Manual

Maintenance and care

Cleaning the drip tray and the coffee grounds container

1
1
2

Cleaning the water tank

Cleaning the bean hopper

Cleaning the brew group and the coffee exit duct

Maintenance of your machine is important to prolong the life of your
machine and to ensure optimum quality and taste of your coffee.
Perform the following actions while the machine is turned on:
- When the display shows the 'empty coffee grounds container' icon,
empty the coffee grounds container.
- The drip tray is full when the drip tray full indicator pops up through the
drip tray. Empty and clean the drip tray every day.
1 Turn the classic milk frother to the left.
2 Press the release buttons on both sides of the drip tray (1) and pull the
drip tray out of the machine (2).
3 Remove and empty the coffee grounds container.
4 Empty and rinse the drip tray under the tap.
5 Place the coffee grounds container back in the drip tray.
6 Slide the drip tray back into the machine until it locks into position with a
click.
Note: Make sure that the machine is still switched on when you remove the
drip tray. If you switch off the machine before you remove the drip tray, the
'empty coffee grounds container' icon will be visible on the display when
you switch on the machine again, even though the drip tray is empty.
1 Remove the water tank from the machine and rinse it with fresh water
periodically.
2 Fill the water tank with fresh water up to the MAX level indication and
place it back in the machine.
Clean the bean hopper with a dry cloth once a month.

Weekly cleaning of the brew group

1 Turn off the machine and unplug it.
2 Remove the drip tray with the coffee grounds container.
3 Empty the drip tray and rinse it under running water.
English
17