First Installation; Manual Rinsing Cycle - Saeco Intelia Deluxe HD8771/93 Manual

English
10
CAPPUCCINO

First installation

Manual rinsing cycle

- CAPPUCCINO button = UP button: press this button to scroll up through
the display menu.
- SPECIAL DRINKS button = DOWN button: press this button to scroll down
through the display menu.
1 Slide the drip tray with drip tray cover into the machine.
2 Remove the water tank.
3 Fill the water tank to the MAX level with fresh water.
4 Fill the coffee bean hopper with coffee beans.
5 Insert the small plug into the socket located on the back of the machine.
Insert the power plug into the electrical outlet.
Note: The display reminds you have to insert the hot water dispensing
spout. If not present, press on both sides of the hot water dispensing
spout and insert it into the machine until you hear a click.
6 Place a container under the hot water and coffee dispensing spouts.
7 Press the STANDBY button.
8 Press the OK button to start the automatic circuit priming cycle.
- The machine performs an automatic rinsing cycle.
9 Remove the water tank from the machine, empty it.
10 Fill the water tank with fresh water and place it back into the machine.
11 Continue with the next step: the manual rinsing cycle.
1 Place a container under the coffee dispensing spout.
2 Press the AROMA STRENGTH button to select pre-ground coffee. Do not
add pre-ground coffee.
3 Press the ESPRESSO LUNGO button. The machine starts dispensing
water.
4 When the machine stops dispensing, empty the container. Repeat steps
1-3 twice.
5 Press the SPECIAL DRINKS button. Place a container under the hot water
dispensing spout.
6 Press the UP/DOWN buttons to scroll through the options of the display.
Press the OK button to select 'hot water'.
-
The display reminds you have to install the hot water dispensing
spout (if not present), press the OK button to confirm.