Operation
Operating Instructions 967 - 02.0 - 11/2016
4.5
Winding the hook thread
CAUTION
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Switch off the machine before winding the hook
thread.
Do not reach into the needle tip.
Fig. 9: Winding the hook thread (1)
10 - 15 mm
①
②
③
(1) - Tube
(2) - Tensioning plate
(3) - Thread guide
To wind the hook thread:
1.
Fit the thread reel on the reel stand (6).
2.
Loosen the nut (5).
3.
Set the tube (1) to the height specified above.
4.
Turn the tube so that the opening (4) faces the thread guide (3).
5.
Tighten the nut (5).
10 - 15 mm
(4) - Hole in the tube
(5) - Nut
(6) - Reel stand
⑥
⑤
④
29