Table of Contents
Advertisement
100
7.9.1
Connecting the sewing lamp
Fig. 54: Connecting the sewing lamp (1)
①
②
(1) - Housing cover
(2) - Control
To connect the sewing lamp:
1.
Remove the control (2) if the control (2) has already been
assembled.
2.
Open the housing cover (1).
3.
Connect the cable (3) to contacts 3 and 4 on the terminal strip (4).
4.
Close the housing cover (1).
(3) - Cable
(4) - Terminal strip
Operating Instructions 967 - 02.0 - 11/2016
Setup
④
③
Advertisement
Table of Contents
