Table of Contents
Advertisement
Setup
Operating Instructions 967 - 02.0 - 11/2016
2.
Fit the reel stand arm (7) to the reel stand holder (3).
• upper position (1): with inclination adjustment
• lower position (4): without inclination adjustment
3.
Tighten the reel stand arm (7) using the screws (2).
4.
Set the desired angle of inclination at the upper position (1).
7.9
Electrical connection
DANGER
Risk of death from live components!
Unprotected contact with electricity can result in
serious injuries or death.
Only qualified specialists may perform work on
electrical equipment.
Important
The voltage on the type plate of the sewing motor must correspond
to the mains voltage.
99
Advertisement
Table of Contents
