Remove The Fuses - Kärcher AP 100 M Service Manual

5.1.5 Remove the fuses

Preliminary tasks:
Remove operating panel.
1 Fastening nut
2 Cable connector
3 Cover
Remove the cable ties.
Loosen the mounting nuts.
Remove cover.
1 Operator console
2 Cover flap
Pull out the connecting plug.
Unscrew the fastening nut with the cover flap.
Remove the fuse toward the rear.
Installation in reverse order
Note
The fuse of the suction turbine (left) has a power of 5
A, the fuse of the pump (right) has 7 A.
After the assembly, check all hoses for leaks.
English 5.906-508.0 Rev. 00 (11/10)
23