7.2 Remove the appliance cover
Pull out both bearings.
Remove the hood.
7.3 Oil change
Note
See "Technical Details" for details of oil quantity and
type.
Open the device hood.
Unscrew oil drain plug.
Drain the oil in a collection basin.
Fix in the oil drain screw and tighten it.
Torque 20...25 Nm.
Turn the oil fill screw out.
Fill in new oil slowly; air bubbles should go out.
The oil level must be at the centre of the oil level
display.
Screw in oil filling screw.
Close cover.
English 5.906-565.0 Rev. 00 (12/12)
15