Remove The Detergent Dosing Valve - Kärcher AP 100 M Service Manual

5.1.3 Remove the detergent dosing valve

Preliminary tasks:
Remove operating panel.
1 Turning handle
2 Operator console
Pull off the rotary handle.
1 Detergent hose
Loosen the hose clamp and pull the detergent
hoses off.
1 Fastening nut
Loosen the mounting nuts
Remove the dosing valve toward the rear.
Installation in reverse order
Note
Do not transpose the hoses during installation.
After the assembly, check all hoses for leaks.
English 5.906-508.0 Rev. 00 (11/10)
21