Service Tasks; Control Terminal; Remove Operating Panel; Removing The Switch - Kärcher AP 100 M Service Manual

5

Service tasks

5.1 Control terminal

5.1.1 Remove operating panel

1 Fastening screw
2 Operator console
Unscrew the suction hoses for the detergent from
the detergent containers.
Unscrew locking screws.
Remove the control panel.
Disconnect the connections.
Installation in reverse order
Note
After the assembly, check all hoses for leaks.
20
English 5.906-508.0 Rev. 00 (11/10)

5.1.2 Removing the switch

Preliminary tasks:
Remove operating panel.
1 Fastening nut
2 Cable connector
3 Cover
Remove the cable ties.
Loosen the mounting nuts.
Remove cover.
1 Lock
2 Operator console
Pull the plug connections from the switches.
Press the locks together and slide the switch out.
Installation in reverse order
Note
Observe the plug arrangement during installation.
After the assembly, check all hoses for leaks.