Sy164 - Dvr Back Panel - Sylvania SY164 Instruction Manual

SY164 - DVR Back Panel

SY164 - DVR Back Panel
1. ALARM IN - These terminals are used to connect external motion sensors, door/window contacts, etc.
Available terminal range: SEN1 - SEN 4
2. VIDEO INPUT (1-4) - Connect to video a source, such as camera (BNC Connection). The video outputs from
the desired cameras to these inputs
3. MAIN POWER SWITCH - ON/OFF Main power switch for DVR
4. ALARM OUT - This alarm output can be connected to an alarm output relay to trigger devices with a N/O
(Normally open) circuit
5. VIDEO OUTPUT - Connect the RCA output to display the DVR's Menu and Video Playback
6. POWER INPUT - Connect the supplied 12V power adapter to this input
12
1 2
4 5
3
6