Time / Date; Schedule Setting - Sylvania SY164 Instruction Manual

Time / Date

Time / Date
This submenu allows you to change the Time and Date displayed on the monitor (On Screen Display), and
recorded through the DVR.
1. TIME FORMAT - Set the time display format. Time
format can be selected either by a 24 hour or 12 hour
base (AM or PM).
2. DATE FORMAT - There are three formats to display the
date:
• MM-DD-YYYY
• YYYY-MM-DD
• DD-MM-YYYY
01 / 01/ 065: 00: 56 AM
MM/ DD/ YY HH: 00: SS
3. DATE/Time SET - The time and date will be displayed
below (e.g. 06/01/05 10:49:41 AM)

Schedule Setting

This Submenu allows you to Schedule times in which you're programming the DVR to record automatically.
1. SCHEDULE ON/OFF - Select the recording schedule to
be ON or OFF
2. PASSWORD (RECORD STOP) - If you select [ON], you
will need to input a password when you want to RECORD
STOP, and [OFF] will allow you to RECORD STOP without
a password.
• The default master password is: 111111
• The default user password is: 222222.
• This is not needed when you perform manual recording.
24
TIME / DATE SET
TIME FORMAT
DATE FORMAT
DATE /TIME SET
01 / 01 / 06
SCHEDULE SETTING
SCHEDULE ON/OFF
PASSWORD (RECORD STOP)
RECORD FPS
RECORD QUALITY
SET BY WEEK
SET BY DAY
OFF
ON
1
LOW