Event Log - Sylvania SY164 Instruction Manual

Event Log

Event Log
The event log keeps a record of all errors and alarms that may occur on the DVR. Each of these are stored with
a Time/Date Stamp. A single page can display up to 10 alarm recorded events. Press the UP and DOWN but-
tons and then press the SELECT button to DELETE ALL EVENTS to clear the EVENT record. A password will
need to be entered at this point.
1. VIDEO LOSS - Records Information when the camera is
disconnected or removed on any of the 4 channel inputs.
2. POWER LOSS - Records information when there's any
interruption in the main power. Up to 9 power loss events
can be displayed.
3. Hard Drive ERROR - An error message will be displayed
if the Hard Drive cartridge was not inserted properly or
not locked with the key. (Please see the troubleshooting
chart)
4. ALARM - Records all alarm events. Up to 6 events can
be recorded
5. Hard Drive FULL - Will display when the Hard Drive has
reached its maximum capacity
Advanced
Menu settings such as changing & enabling the master and user password, loading the default settings, overwriting
the Hard Drive and clearing the Master and Slave Hard Drive can be done.
• The default MASTER password is 111111
• Input (6): _ _ _ _ _ _) for the DVR is 111111,
Enter this information to gain access to the Advanced Menu. After entering the correct password, the monitor will
display the words, "Password Correct"
If all master and user passwords are disabled, this menu will not display again.
28
EVENT LOG
VIDEO LOSS
POWER LOSS
Hard Drive ERROR
ALARM
Hard Drive FULL
DELETE ALL EVENTS
00
09
00
06
00