Advanced - Sylvania SY164 Instruction Manual

1. CHANGE MASTER PASSWORD - To change the
master password you will need to enter the "Current
Password", the "New Password", and the confirmation
of the password. The default master password is 111111.
When you have entered the current password and you
are ready to enter the new password and confirmation
password do not press the UP or Down arrow keys to
move down, since the DVR will take this as a character
2. CHANGE USER PASSWORD - To change the user
password you will need to enter the "Current Password",
the "New Password", and the confirmation of the
password. The default user password is 222222.
When you have entered the current password and you
are ready to enter the new password and confirmation
password do not press the UP or Down arrow keys to
move down, since the DVR will take this as a character
3. MASTER PASSWORD ENABLE - Press the select
button to enable (ON) or disable (OFF)
4. USER PASSWORD ENABLE - Press the select button
to enable (ON) or disable (OFF)
5. DEFAULT SETTING - If this is selected then the DVR
will load all the original default settings, such as
schedule, sensor/alarm, etc. You will be asked whether
you'd like to load the default (YES) or (NO)
6. OVERWRITE ENABLED - When enabled (YES),
recording will continue uninterrupted when the Hard
Drive is full. The previous recording will be Overwritten
in a "first in, first out" basis. When disabled (NO),
recording will stop when the Hard Drive fills up. It will
then need to be cleared in order for recording to continue.
7. MASTER Hard Drive CLEAR - When the Master Hard
Drive is full you will need to clear the space. You will be
asked to format the Hard Drive (Hard Drive FORMAT Y/
N?)
8. SLAVE Hard Drive CLEAR - When the Slave Hard Drive
(if installed) is full you will need to clear the space. You
will be asked to format the Hard Drive (Hard Drive
FORMAT Y/N?)
PASSWORD INPUT(6): _ _ _ _ _ _
ADVANCED MENU
CHANGE MASTER PASSWORD
CHANGE USER PASSWORD
MASTER PASSWORD ENABLE
USER PASSWORD ENABLE
DEFAULT SETTING
OVERWRITE ENABLED
MASTER Hard Drive CLEAR
SLAVE Hard Drive CLEAR
LOAD DEFAULT Y/N?

Advanced

OFF
OFF
[YES]
N/A
29