Connect The Hard Drive Into The Cartridge Casing; Secure The Hard Drive In The Casing (Optional); Slide The Top Cover Over The Cartridge Casing - Sylvania SY164 Instruction Manual

3. Connect the Hard Drive into the Cartridge Casing.

• Take the Hard Disk Drive and Connect the two cables from the back of the Cartridge Casing to the Hard
Drive.
• The cables should be pushed in firmly, but not forcibly.
• The 4 Pin connection is the DC Power cable, and the wider cable is the standard Hard Drive IDE type
connection.

4. Secure the Hard Drive in the Casing (optional)

• Use screws and tighten them, positioning the Hard Drive into place. This step is optional, but it is

5. Slide the top Cover over the Cartridge Casing

Installing the Hard Drive
Cable Connection
recommended.
Position Hard Drive
and secure with pro-
vided screws
• Slide the Cover forward over the
Cartridge Case. Ensure it is secured in
Cover
place over the release latch.
Hard Drive posi-
17