Table of Contents
Advertisement
Back Panel Connections
2
1
1. BNC Camera Inputs - Channel 1-4 camera inputs
2. RCA Audio inputs - Channel 1-4 Audio inputs
3. Monitor A/V Out - Audio/Video out for an additional monitor.
4. Slave A/V Out - Audio/Video for a VCR or other video equipment.
5. Alarm Input and Trigger Out – External Alarm inputs for Channels 1 – 4.
Connect external alarm sensors between the alarm input and ground.
6. RS-485 Terminals – Connect the PTZ control wires to these terminals.
7. VGA IN – Connect the VGA signal from a PC to this input.
8. RS-232C Terminal - For connection of the RS-232C terminal of the unit to a
computer, please use a special RS-232C cable.
9. VGA IN IDE-SUB - This connector will be used for external HDD.
3
4
5
9
6
7
8
Advertisement
Table of Contents
