Sylvania SY164 Instruction Manual page 25

4-channel dvr

Table of Contents

3. RECORD FPS - Allows you to set the recording speed in

Frames Per Second. Available FPS settings are: 1, 2, 3,

4, 5, 7,10, 15 & 30. The speed of 30 FPS is also known

as "Real Time". 1 FPS is the slowest Time Lapse speed;

it will allow for the longest recording durations as it

records less information. Please refer to Appendix # 2

for the different recording times

4. RECORD QUALITY - Sets the quality level of recording.

Available settings are: Low, Normal or High. Higher

quality recording consumes more memory on your Hard

Drive

5. SET BY WEEK - Set the scheduled recording time

weekly. Monday to Friday 00:00 to 23:59

6. SET BY DAY - Set the scheduled recording time by the

selected day. You can program up to 30 scheduled

recordings. Under the Record-Time you can also choose

to ADD or DEL (Delete) once you've made the selection

• Example: 01 2005 04/01 22:40 09:10 ADD. This

means that recording will take place on April.1, 2005

at 10:40 pm to April.2, 2005 to 7:50 am for 9 hours

and 10 minutes. After setting the DAY, choose ADD

and press the SELECT button. HH is based on a 24

hour clock

NOTE:

If there is a power failure during schedule recording, and the main AC power comes back, you will see

the letter [M] (P) for master power loss at the bottom of the monitor, followed by the Letter [M] [S] for

master schedule recording. At this point the DVR will continue to record for the set Scheduled time.

After the schedule recording the DVR will start recording in the Master Manual [M][M] recording mode.

You will need to press the STOP button to stop the recording.

.YEAR MM/DD HH MM RECORD

Schedule Setting

Table of Contents