Connecting The Monitor; Connecting The Sy164 To A Monitor (Slave) - Sylvania SY164 Instruction Manual

Connecting The Monitor

There are many types of Sylvania monitors available for use with the SY164 DVR. The following installation
instructions describe the set-up for:

• Connecting the SY164 to a monitor (slave)

• Connecting the SY164 to a Sylvania Observation System
The SY164 includes 4 RCA cables and 8 BNC to RCA adapters. This cable/adapter combination will allow
this DVR to connect to most slave monitors without having to purchase additional cables or adapters.
NOTE:
On Sylvania quad monitors the BNC video input channel connectors also support video output. The BNC
video input/output on a Sylvania quad monitor can be connected to BNC video input of the DVR.
Connecting the SY164 to a monitor (slave)
In this configuration, the cameras connect to the DVR and the monitor is used as the display device for the
DVR.
• Connect the cameras to the video inputs of the DVR
• Connect the DVR video output to the video input of the monitor.
Cameras
CH1 CH2
Back of SY164 DVR
DVR Video Out
CH3 CH4
Back of Monitor (not included)
Video In
Connecting The Monitor
21