Home Depot FC132-BJRL Use And Care Manual page 12

Assembly - Installing the Light Kit
10
Attaching the light kit tter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light xture.
□
Loosen the three screws (LL) on the switch cup cover of the
light kit tter assembly.
□
Connect the wires from the light kit tter assembly (G) to the
wires from the switch cup of the fan motor assembly by connect-
ing the molded adaptor plugs together (
orange
). Carefully tuck all wires and splices in the switch cup.
□
Align the three screws (LL) on the switch cup cover of the light kit
tter assembly with the three key slots in the switch cup.
Position the light kit tter assembly on the switch cup
and turn it clockwise until it locks. Tighten the three screws (LL) that
were loosened in rst step to secure the light kit tter assembly (G).
blue to blue,orange to
11
Attaching the glass bowl
WARNING: Do not overtighten when installing the shade into the
light kit. Allow the shade to cool completely before removing.
□
Place the glass bowl (K) into the light kit assembly (G) ,
aligning the three at areas on the top ange of the glass
bowl (K) with the three raised dimples in the light kit
assembly (G). Turn the glass bowl (K) clockwise until it
stops.
12
Item # 1000*****/1000*****
Item # FC132-BJRL/FC140-BJRL