Table of Contents
Advertisement
20 CLEANING, CARE
266
–
After cleaning, ride the vehicle a short distance until the
engine warms up.
Info
The heat produced causes water at inaccessible loca-
tions in the engine and on the brake system to evapo-
rate.
–
After the motorcycle has cooled off, lubricate all moving parts
and bearings.
–
Clean the chain. (
p. 172)
–
Treat bare metal (except for brake discs and the exhaust sys-
tem) with a corrosion inhibitor.
Preserving materials for paints, metal and rubber
(
p. 306)
–
Treat the painted parts with a mild paint polish.
Perfect Finish and high gloss polish for paints (
Info
Do not polish parts that were matte when delivered as
this would strongly impair the material quality.
–
Treat the plastic parts and powder-coated parts with a mild
cleaning and care product.
p. 306)
Advertisement
Table of Contents
