MuxLab 500112 Quick Installation Manual

Specifications

Environment PoE CCTV IP
PoE CCTV IP cameras with a 10/100Mb/s Ethernet port, using up to
Devices
15.4 Watts.
Transmission Transparent to the user
Standard supported Ethernet side:
IEEE 802.3 10BaseT,
IEEE 802.3U 100Base-TX
IEEE 802.3af compatible PoE
Class 3
PoE Power
Connectors One (1) BNC 75 Ohms.
One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
LED Indicators Power, IP Traffic, 100MBps
Maximum Distance RG59/RG6:
UTP Cat 5e/6:
Note: When installed in an electrically noisy environment, an STP cable
must be used. Also, cross-connection reduces the effective distance
depending on the grade of twisted cable used.
RJ45 Pin Configuration RJ45 Link
Pin 1 (R) Pin 2 (T)
Reverse Polarity
Pin 3 (R) Pin 6 (T)
Sensitive. Use EIA/TIA
Pin 4 (R) Pin 5 (T)
568A or 586B straight-
Pin 7 (R) Pin 8 (T)
through wiring.
Cable UTP/STP: One (1) Cat 5e/6 or better twisted pair cables required
RG59/RG6: 75 Ohms (avoid CCS cable)
PoE Power Supply Optional PoE Power Supply (110-240V/48VDC/.625A, 2.1mm plug)
with inter-changeable blades (sold separately). Required at the Camera
(500113)
Side Device when coax cable quality or length results in insufficient
power reaching the camera. Required at the Network Side Device
when used with non-PoE LAN switch.
Power Consumption Network Side: 1.82 Watt
Temperature Operating: 0° to 40°C
Humidity: Up to 95% non-condensing
Metal
Enclosure
Accessories Wall-mount brackets included
Dimensions 4.37" x 2.95" x 0.99" (110 x 75 x 25 mm)
1.5 lb (0.68 kg)
Weight
Compliance Regulatory: FCC, CE, RoHS
Warranty 2 years
Order Information 500112 LongReach CCTV IP PoE Extender Kit
500113 Power Supply for 500112 (48VDC)
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588
Toll Free (North America): (877) 689-5228
E-mail: videoease@muxlab.com
© MuxLab Inc.
Up to 980 ft (300m) @ 100Mbps
Up to 330 ft (100 m)
Camera Side: 1.73 Watt
Storage: -20° to 85°C
Flammability: 94V0
Fax: (514) 905-0589
URL: www.muxlab.com
94-000749-A SE-000749-A
LongReach CCTV IP PoE Extender Kit
500112
Quick Installation Guide

Overview

The LongReach CCTV IP PoE Extender Kit (500112) allows one IP camera (15.4
Watts) to be connected up to 980 ft (300 m) via a single 75-ohm coax cable in a point-
to-point configuration. The maximum distance depends on the grade and quality of
coaxial cable. An optional PoE 48VDC Power Supply (500113) is available if required.

Applications

CCTV IP surveillance

Installation

1. Identify the connectors on the Extenders as indicated on the product labels.
2. Attach the surface-mount brackets if required as shown below.