Preparing The Charging Station - Keba KeContact P30 e-series Operating Instructions Manual

Authorization
5.2.1

Preparing the charging station

To teach in the RFID master card and to delete the taught-in RFID cards, the
charging station must be rebooted via the service button. To access the ser-
vice button, proceed as follows:
1) Unscrew the two screws on the bottom of the housing cover
2) Lift the housing cover at bottom max. 1 cm
3) Unscrew the four screws of the connection panel cover
18
the connection panel cover upwards.
1 .
1 and then push upwards 2.
1 and remove
Operating instructions V3.22
P30
© KEBA