Advertisement
TOOLS AND SUPPLIES REQUIRED
Phillips screwdriver
Flat-tip screwdriver
Ratchet
10 mm Socket
Isopropyl alcohol
Shop towel
Diagonal cutters
Torque wrench
T20 TORX bit
Flashlight
Tape
10 mm Open end wrench
Scissors
White marker
Ruler
The following tools are available through the Honda Tool
and Equipment Program. On the iN, click on: Service >
Service Bay > Tool and Equipment Program, then enter
the number under "Search". Or, call 888-424-6857.
• Trim Tool Set (T/N SOJATP2014)
• Plastic Trim Tool (T/N SILTRIMTL10)
Illustration of the Automatic Day/Night Mirror in the
Vehicle
AUTOMATI
C DAY/
NIGHT
MIRROR
2 of 14
AUTOMATIC DAY/NIGHT
MIRROR
2A FUSE
QD42301AJ
INSTALLATION
Customer Information: The information in this
installation instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
"do-it-yourselfers."
1.
Disconnect the negative cable from the battery.
2.
Loosen the TORX screw, and remove the rearview
mirror from the mirror mount.
REARVIEW MIRROR
(Discard.)
AII01797-23 (1504)
MIRROR
MOUNT
© 2015 American Honda Motor Co., Inc. – All Rights Reserved.
TORX SCREW
(Loosen.)
QD42302BJ
Advertisement
