Honda 08V03-T7S-100 Installation Instructions Manual page 12

With Other Accessory Harness 8-pin Connector
32. If other accessory harness 8-pin connector is
plugged into the fuse box, unplug the 8-pin
connector from the fuse box, then plug the automatic
day/night mirror harness 8-pin connector into the
fuse box. Remove and discard the dummy connector
from the automatic day/night mirror harness 8-pin
connector, and plug other accessory harness 8-pin
connector into the automatic day/night mirror
harness 8-pin connector.
AUTOMATIC DAY/NIGHT
Plug in
MIRROR HARNESS
FUSE
here.
8-PIN CONNECTORS
BOX
FRONT VIEW
12 of 14
33. Secure the 8-pin connectors and automatic day/
OTHER
ACCESSORY
HARNESS
8-PIN
CONNECTOR
DUMMY
CONNECTOR
34. Route the automatic day/night mirror harness along
(Discard.)
QD42316AJ
AII01797-23 (1504)
night mirror harness to the vehicle harness with
three wire ties.
8-PIN VEHICLE
CONNECTORS HARNESS
AUTOMATIC DAY/NIGHT
MIRROR HARNESS
the vehicle harness. Remove the bolt, and install the
automatic day/night mirror harness ground terminal
with one ground bolt.
AUTOMATIC DAY/
BOLT
(Discard.) NIGHT MIRROR
HOOD
HARNESS GROUND
OPENER
© 2015 American Honda Motor Co., Inc. – All Rights Reserved.
3 WIRE TIES
QD42317AJ
VEHICLE
HARNESS
GROUND BOLT
QD42318AJ