Advertisement
Backup Sensor Kit
P/N 08V67-T2A-100K
2
Center sensors
2
Corner sensors
TOOLS AND SUPPLIES REQUIRED
Phillips screwdriver
Small flat-tip screwdriver
10 mm Open end wrench
10 mm Socket
Pushpin
Ratchet
3 mm Drill bit
Eye protection (face shield, safety goggles, etc.)
File
Scissors
Ruler
Blanket
Isopropyl alcohol
Shop towel
24 mm and 26 mm Hole saws
Drill
Hex wrench
Diagonal cutters
Masking tape
Steel wire
Tape
The following tool is available through the Honda Tool and
Equipment Program. On the iN, click on: Service >
Service Bay > Tool and Equipment Program, then enter
the number under "Search." Or, call 888-424-6857.
• Trim Tool Set (T/N SOJATP2014)
2 of 15
(Blue)
(White)
AII 50087 (1308)
Illustration of the Backup Sensors on the Vehicle
2A FUSE
CORNER
SENSOR
2 CENTER
SENSORS
INSTALLATION
Customer Information: The information in this
installation instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
"do-it-yourselfers."
NOTE: Refer to Parts Information Bulletin (PIB) for the
proper color sensors.
1.
Disconnect the negative cable from the battery.
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
CONTROL
UNIT
BUZZER
CORNER
SENSOR
SUBHARNESS
QB21607BG
Advertisement
