Offset Menu - JB Systems CLUBSPOT Operation Manuals

ENGLISH
Led Display on/off [LEd]
Switches the LED display automatically off or not.
• Press the [MENU] and ▲/▼ buttons until "[Led]" is shown on the display.
• Press the [ENTER] button.
• Use ▼ and ▲ buttons to select "[on]" (display always lit) or "[oFF]" (display dark when not used).
• Once the right mode is shown on the display, press the [ENTER] button to select it.
• Press the [MENU] button for about 2 seconds to store the setting and to return to running mode.
Display Rotation [dISP]
Rotate the display over 180° (upside-down) or not.
• Press the [MENU] and ▲/▼ buttons until the display shows "dISP".
• Press the [ENTER] button.
• Use ▼ and ▲ buttons to select "[no]" (normal display always lit) or "[YES]" (display upside-down).
• Once the right position is shown on the display, press the [ENTER] button to select it.
• Press the [MENU] button for about 2 seconds to store the setting and to return to running mode.
Auto Test [tESt]
Used to activate the internal "self-test" program which checks all possibilities of the unit.
• Press the [MENU] and ▲/▼ buttons until the display shows "[tESt]".
• Press the [ENTER] button to start the internal self-test program.
• To go back to the functions press the [MENU] button for about 2 seconds.
Temperature inside the unit [tEMP]
Used to show the temperature inside the unit
• Press the [MENU] and ▲/▼ buttons until the display shows "[tEMP]".
• Press the [ENTER] button to show the internal LED temperature of the unit on the display.
• To go back to the functions press the [MENU] button again.
If you want to go back to normal running mode: press the [MENU] button for about 2 seconds.
Fixture Time [FhrS]
Used to show the number of working hours of the unit.
• Press the [MENU] and ▲/▼ buttons until the display shows "[FhrS]".
• Press the [ENTER] button to show the number of working hours in the display.
• To go back to the functions press the [MENU] button.
Reset [rESt]
Used to force a reset of the unit.
• Press the [MENU] and ▲/▼ buttons until the display shows "rESt".
• Press the [ENTER] button to reset the unit.
REMARK: also check the chapter about the DMX-channel configuration of the unit to find out how you can
force a reset by DMX.

OFFSET MENU:

Used to adjust the home position of several functions: offset parameters for PAN, TILT, COLORS,
GOBOS and light output.
If you're not already in the setup menu, just press the [MENU] button shortly to enter the setup menu.
• Now press the [ENTER] button for about 2 seconds to go into offset mode.
• Use ▼ and ▲ buttons to select the function you want to adjust : [PAN], [TILT], [Colo], [Gobo] and [5Ch]
•
[EPAN] : adjustable from -127 to 127
•
[ETILT] : adjustable from -127 to 127
•
[Colo] : adjustable from -127 to 127
•
[Gobo] : adjustable from -127 to 127
•
[5Ch] : adjustable from 128 to 255 (is light output)
• Press the [ENTER] button.
• Use ▼ and ▲ buttons to adjust the home position
• Press the [ENTER] button to select your setting.
• Press the [MENU] button for about 2 seconds to store the setting and to return to running mode.
JB SYSTEMS
®
6/12
USER MANUAL
CLUBSPOT