ENGLISH
procedure in the user manual supplied with the WTR-DMX DONGLE from BRITEQ
WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order code: 4645)
10. [DMX OUT]: 3p XLR Female connector to connect other projectors or use in Master/slave mode.
11. [POWER IN]: with IEC socket and integrated fuse holder, connect the supplied mains cable here.
12. [FAN]: for cooling the electronic components in the base of the machine.
SETUP MENU:
This is the list of all the functions in the machine.
To select any of these functions, press the [MENU] button and use the [▲/▼] buttons to browse the menu.
Select the desired function with the [ENTER]
button.
Use [▲/▼] buttons to change the mode or value.
Once the required mode or value is selected, press
the [ENTER] button to select.
[A001...A512]
Used to set the starting address in a DMX setup.
Press the [MENU] and [▲/▼] buttons until [A001]
is shown on the display.
Press the [ENTER] button.
Use [▲/▼] buttons to change the DMX512
address.
Once the correct address is shown on the display,
press the [ENTER] button to select and store it.
Press the [MENU] button to return to the main
menu.
Reset mode [rSt]
Used to reset the machine.
Press the [MENU] and [▲/▼] buttons until [rSt] is
shown on the display.
Press the [ENTER] button.
The machine will now do it's reset to the startup
values.
Offset mode [Ad t]
Used to adjust the home position of Pan, Tilt,
Color, Gobo and Focus.
Press the [MENU] and [▲/▼] buttons until [Ad t] is
shown on the display.
Press the [ENTER] button.
Use [▲/▼] buttons to select [P018]
Press the [ENTER] button.
[dELE]: this will put all the offset values to
0000.
[F]: use [▲/▼] buttons to adjust the OFFSET
of the [FOCUS].
[g]: use [▲/▼] buttons to adjust the OFFSET
of the [GOBO].
[C]: use [▲/▼] buttons to adjust the OFFSET
of the [COLOR].
[t]: use [▲/▼] buttons to adjust the OFFSET of the [TILT].
[P]: use [▲/▼] buttons to adjust the OFFSET of the [PAN].
Press the [MENU] button to return to the main menu.
Factory reset mode [rFAC]
Used to reset the machine to its original factory settings.
Press the [MENU] and [▲/▼] buttons until [rFAC] is shown on the display.
®
JB SYSTEMS
4/10
USER MANUAL
®
. The separate
STRIKER