Safety Considerations - Carrier WeatherExpert 48LC Installation Instructions Manual

Weatherexpertr series single package rooftop gas heat/electric cooling unit with puronr (r ---410a) refrigerant sizes: 14, 17, 20, 24, 26
Hide thumbs Also See for WeatherExpert 48LC:
Table of Contents

Advertisement

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .

SAFETY CONSIDERATIONS

Improper
installation,
adjustment,
maintenance, or use can cause explosion, fire, electrical
shock or other conditions which may cause personal injury
or property damage. Consult a qualified installer, service
agency, or your distributor or branch for information or
assistance. The qualified installer or agency must use
factory- - authorized kits or accessories when modifying this
518
. . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . .
. . . . . .
. . . . . . . . . . . . . . . . .
X
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
alteration,
service,
51
product. Refer to the individual instructions packaged with
the kits or accessories when installing.
51
Follow all safety codes. Wear safety glasses and work
51
gloves. Use quenching cloths for brazing operations and
51
have a fire extinguisher available. Read these instructions
51
thoroughly and follow all warnings or cautions attached to
the unit. Consult local building codes and appropriate
52
national electrical codes (in USA, ANSI/NFPA 70,
52
National Electrical Code (NEC); in Canada, CSA C22.1)
52
for special requirements.
52
It is important to recognize safety information. This is the
safety- - alert symbol
52
unit and in instructions or manuals, be alert to the
54
potential for personal injury.
55
Understand the signal words DANGER, WARNING,
55
CAUTION, and NOTE. These words are used with the
safety- - alert symbol. DANGER identifies the most serious
55
hazards which will result in severe personal injury or
55
death. WARNING signifies hazards which could result in
55
personal injury or death. CAUTION is used to identify
unsafe practices, which may result in minor personal
56
injury or product and property damage. NOTE is used to
56
highlight suggestions which will result in enhanced
56
installation, reliability, or operation.
56
56
!
56
FIRE, EXPLOSION HAZARD
56
Failure to follow this warning could result in personal
56
injury or death.
59
Disconnect gas piping from unit when leak testing at
pressure greater than 0.5 psig (3450 Pa). Pressures
62
greater than 0.5 psig (3450 Pa) will cause gas valve
damage resulting in hazardous condition. If gas valve is
subjected to pressure greater than 0.5 psig (3450 Pa), it
63
must be replaced before use. When pressure testing
63
field- - supplied gas piping at pressures of 0.5 psig
(3450 Pa) or less, a unit connected to such piping must
be isolated by closing the manual gas valve.
64
80
80
!
80
FIRE HAZARD
80
Failure to follow this warning could result in personal
80
injury, death, and/or property damage.
81
Inlet pressure tab set screw must be tightened and
NPT pipe plug must be installed to prevent gas leaks.
83
GAS VALVE
INLET PRESSURE
TAP SET SCREW
2
. When you see this symbol on the
WARNING
WARNING
1
/
in.
8

Advertisement

Table of Contents
loading

Table of Contents