Aabbhh - ICP DAS USA I-7521 User Manual

5.3.36 #AABBHH

For: I-7521/I-7522/I-7522A/I-7524/I-7527

Description:
The function sets the multiple onboard DO-1/2/3/4/5 values.
(I-7522A pin assignment refers to Sec.1.4)
Note: Supported by the firmware version 3.0 and upward.

Syntax:
#AABBHH[chk](CrLf)
# Delimiter character
AA 2-character module address in HEX format. The valid range is from
00 to FF
BB 00/0A
HH 2-character DO value in HEX format. DO1 is set at LSB. The valid
value range is from 00 to FF
2-character checksum. If the checksum is disabled  no [chk]
[chk]
(CrLf) End Character

Response:
no response  syntax error, communication error, or address error
> Delimiter character indicating a valid command
? Delimiter character indicating an invalid command
2-character checksum. If the checksum is disabled  no [chk]
[chk]
(CrLf) End Character

Example: (Assume the AA address value of the I-7521 module is 01)
command: #010003(CrLf)
response: >(CrLf)
command: #010A02(CrLf)
response: >(CrLf)

Note:
If the host fails, the #AABBHH command will be ignored and the
response string will be "!." (In normal situations, the response string will
be " >")
I-7521/I-7522/I-7522A/I-7523/I-7524/I-7527 User's Manual,Ver2.5 Aug.2015
valid command  >[chk](CrLf)
invalid command  ?[chk](CrLf)
Sets DO1=ON, DO2=ON, DO3=OFF
Sets DO1=OFF, DO2=ON, DO3=OFF
118