ICP DAS USA I-7521 User Manual page 59

Step 5: Send "To-Remote-PC2" string from the Host PC the second Remote
PC(#2)
Type :02To-Remote-PC2
Press ENTER to send the command string to the I-752N module
Type
Press ENTER to send the command string to the I-752N module
The following screen will be shown on the Host PC:
...................................
AutoRun:
Autodownload files: None
Current work directory="D:\vic\752n\others\ECR\061102"
original baudrate = 9600!
now baudrate = 115200!
7188xwCmd:b9600original baudrate = 115200!
now baudrate = 9600!
Current baud rate is 9600
{change to Line Mode}
:01To-Remote-PC1
:02To-Remote-PC2
:02To-Remote-PC2
The following screen will be shown on the second Remote PC (#2):
.................................................
Current set: Use COM7 115200,N,8,1
AutoRun:
Autodownload files: None
Current work directory="D:\vic\752n\others\ECR\061102"
original baudrate = 9600!
now baudrate = 115200!
7188xwCmd:b9600original baudrate = 115200!
now baudrate = 9600!
Current baud rate is 9600
{change to Line Mode}
To-Remote-PC2
To-Remote-PC2
I-7521/I-7522/I-7522A/I-7523/I-7524/I-7527 User's Manual,Ver2.5 Aug.2015
:02To-Remote-PC2
59