ICP DAS USA I-7521 User Manual page 50

....................................
Autodownload files: None
Current work directory="D:\vic\752n\752N_V3_20061023\7188XC"
original baudrate = 115200!
now baudrate = 115200!
7188xwCmd:b9600original baudrate = 115200!
now baudrate = 9600!
Current baud rate is 9600
{change to Line Mode}
$01M
!017521
$01F
!01A3.03
$01A02
!01
$02M
!027521
$01M
Step 15: Change the Baud Rate for COM2 of the I-752N module
Type the command  $02B0115200
Press ENTER to send the command to the I-752N module
Check that the display on the 5-digit, 7-seg LED is as follows:
(For firmware version 3.02 and above, see Note*)
Press ALT + C.
Type b115200 to change the Baud Rate of the PC side.
Press ENTER to confirm the Baud Rate=115200.
Type the command  $02M
Press ENTER to send the command to the I-752N module.
Check that the module returns  !027521 (for example
I-7521).
I-7521/I-7522/I-7522A/I-7523/I-7524/I-7527 User's Manual,Ver2.5 Aug.2015
50