Charging The Control Computer; On The E-Bike; Via Usb - Bosch i:SY User Manual

Operation
• Charge the control computer (see following chapter "Charg-
ing the control computer")�
Fig.: Control computer
12.2.5 Charging the control computer
note: Without charging the internal rechargeable battery again,
the data and time will remain saved for a maximum of 6 months.
After being switched back on, the date and the time of the Nyon
control computer will automatically be reset after successful GPS
location�
• Charge the control computer at least every 6 months�
12.2.5.1 on the e-bike
5� Insert a fully charged rechargeable battery in the e-bike (see
chapter "Operation / Rechargeable battery")�
6� Insert the control computer in the holder (see chapter "Inser-
tion and removal")�
7� Use the button on the rechargeable battery to switch the
e-bike on�
12.2.5.2 Via uSB
1� Open the cover (see Fig�: "USB port")�
2� Use a USB 2.0 cable to connect the USB jack of the control
computer to a commercially available USB charger or the
USB port on a computer.
"USB connected" will appear in the text display field.
• If you switch the Nyon control computer off during the charging
process, pull the USB plug before you switch the Nyon control
computer on�
Fig.: USB port
1 USB socket
1 2
2 Protective cap
34