Inspection Instructions; Preparations; Rechargeable Battery; Charger - Bosch i:SY User Manual

E-bike pedelec/epac
Table of Contents

Advertisement

Start-up
11.3 Inspection instructions
1� Check whether the rechargeable battery lock is engaged�
2� Check the rechargeable battery for any damage (visual in-
spection)�
3� Check the drive for any damage (visual inspection)�
4� Check the cables and plug connections for damage and
make sure they are securely fastened (visual check)�
• If you discover any missing or damaged parts, do not use
the e-bike�
• Have your specialist repair the e-bike�
note:
Depending on the type of bicycle, your e-bike is equipped
with a frame rechargeable battery, a rack rechargeable battery or
a battery integrated into the frame�
1� Read the entire user manual before you use the e-bike�
2� Prepare the rechargeable battery and the charger for the
start-up of your e-bike�
11.4 Preparations
11.4.1 rechargeable battery
noTICe
If the rechargeable battery is not fully charged before
start-up, the nominal charge of the rechargeable battery
will decrease�
risk of damage!
• Before start-up, charge the rechargeable battery until the
charging indicator on the rechargeable battery goes out�
11.4.2 Charger
A summary of important safety notes with the following content is
located on the bottom of the chargers:
Observe the user manual to ensure safe use� Risk of electrical
shock�
Only use in a dry environment�
Only charge the rechargeable battery of the Bosch e-bike�
Other rechargeable batteries may explode and cause injury.
Do not replace the mains cord� This poses a risk of fire and
explosion.
Read the information on the nameplate of the charger�
• If the information does not correspond to the voltage supply,
do not use the charger� Before you connect the charger to
the voltage supply, read the chapter "Operation / Recharge-
able battery / Charging the rechargeable battery"�
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents