avertX C6012-RW Quick Start Manual

Indoor Drop Ceiling
Camera
Quick Start Guide
C6012-RW
3 6 0 ° 5 0 ° 8 6 °
Please carefully read these instructions before using this product.
Save this document for future use.
Save this document
for future use.

1. General Specifications

Model No. C6012-RW
Image Sensor Sony 1/2.8" CMOS
IP Rating N/A (Indoor)
Wide Dynamic Range Spectrum Vision True WDR
Minimum Illumination @ 50 IRE Color: 4.0 Lux @ F 1.6
B / W: 0.8 Lux @ F 1.6
0 Lux w / R LED ON
Minimum Illumination @ 30 IRE Color: 2.4 Lux @ F1.6
B / W: 0.8 Lux @ F 1.6
0 Lux w / R LED ON
Day / Night True Day / Night
Resolution 1080p (2 MP)
Focal Length 4 mm (86° FoV)
Iris Control F 2.0 Fixed
White Balance Auto, Manual, Preset
Auto White Balance Range 2000K ~ 11000K
Backlight Compensation Yes
Auto Gain Control Yes
Operating Temperature 14°F (-10°C) ~ 122°F (50°C)
Power Consumption 5W Max
Rated Amperage 0.41A
Imput Voltage Power over Ethernet / 12vDC
Weight 0.5 lb (221 g)
Dimensions (W x H) 3.56" x 4.5" (90.5 mm x 114 mm)
Housing / Dome Cover White / Clear
2. Products and
Accessories
Audio, Alarm Cable
Power Cable
Camera
Quick Start Guide
Template Sheet
Screw & Plastic Deco Rings
Anchor - 2pcs (white & black)
A - Lens
B - Tilt Stopper Screw
C - Magnetic Plate
D - Body
Dome Cover
E - Flush Mounting Bracket
3. Product Overview
A
B
C C
C D
E

4. Before Installation

Before installing your camera, read the following precautions:
1. Determine if the site of installation can bear a minimum of five
times the camera weight.
2. Ensure that all cable runs are secure and meet local fire codes.
3. When installing your camera, be sure the installation site is clear of
unnecessary personnel and debris.
Reset to Factory Default:
Press the Reset button for 5 seconds to
return the setup to the factory default.
Warning:
If you press the Reset button, you will
lose all settings.
Reset Button
To access the restart button, detach the
body from the flush mount bracket.
1. Turn the body counter-clockwise and
pull.