Maintenance; Emptying The Dust Cup - Shark Rotator NV552 Instructions Manual

MAINTENANCE

To keep your vacuum's
suction power optimal, follow
these instructions. Make
sure unit is off and cord is
unplugged.
WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing.
Hand wash with
water only to prevent
damage from
cleaning chemicals.
Allow ALL filters
to dry completely
before replacing
in the vacuum to
prevent liquid from
being drawn into
electric parts.
IMPORTANT: Do not use
soap when cleaning the
HEPA filter.
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFF500
Clean every 3 months.
Post-Motor Filter
(HEPA)
XHF500
Clean once a year.
19
1-800-798-7398
STEP 1

EMPTYING THE DUST CUP

Pull up on dust cup
1
release latches and lift
dust cup off pod.
STEP 2
2 Hold dust cup over a
trash bin and press the
empty-release latch on the
bottom.