Assembly - WAGNER Procoat 9185G Owner's Manual

1. Assembly

Start
You will need:
• Two adjustable wrenches
Note: It will be much easier to
attach the hose to the sprayer if
you uncoil it first.
English
1
1. Insert the ends of the hose
bracket into the holes of the
handle as shown.
4
4. Hold the port with an
adjustable wrench, and
tighten the hose with the
other.
6
2
2. Remove the plug from inside
the hose fittings and remove the
cap on the outlet valve. Discard
both.
5
5. Thread the other end of the
hose to the spray gun. Hold
the gun with one adjustable
wrench, and tighten the hose
nut with the other.
3
3. Thread one end of the high
pressure spray hose to the
spray hose port.