Insignia NS-HFMOC101 Quick Setup Manual

PACKAGE CONTENTS
Star base cover (1) Gas lift (1) Star base (1)
Arms and seat bottom (1) Back (1)
Screws Screws Washers
1/4 × 20 mm (4) 1/4 × 40 mm (4) φ6 mm (4)
Allen wrench (1)
Before using your new product, please read these instructions to prevent any damage.
FEATURES
• Adjustable height
• Lockable chair back
ASSEMBLING YOUR CHAIR
Insert the wheels (D) into the star base (C). Keep pushing the wheels in until the metal rims touch the star
base.
Wheels (5)
Seat plate (1)
Caps
(4)
Place the star base cover (A) over the star base (C), then insert the gas lift (B) into the star base. Push the
gas lift in so that it is secure.
Quick Setup Guide
Quick Setup Guide |
Flex Mesh Office Chair
3
Place the seat plate (G) on the seat bottom assembly as shown. Insert four 1/4 × 20 mm screws (H) with
four washers (J) into the seat plate. Tighten them with the Allen wrench. You may need to use the
short side of the wrench to get more leverage.
4
Place the chair assembly onto the gas lift until it is fully inserted.
NS-HFMOC101