Table of Contents
Advertisement
Quick Links
Installation Guide
XX263-30-01
V9360W Outdoor
Network Hemispheric Camera
Vicon Industries Inc., 89 Arkay Drive, Hauppauge, New York 11788
Tel: 631-952-2288 Fax: 631-951-2288 Toll Free: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300
Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the
operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed
to be used in life-critical situations and must not be used for this purpose.
www.vicon-security.com
Document Number: 8009-8263-30-01
Issued: 613
Product specifications subject to change without notice.
Copyright © 2013 Vicon Industries Inc. All rights reserved.
Advertisement
Table of Contents
Related Manuals for Vicon V9360W
Summary of Contents for Vicon V9360W
- Page 1 24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300 Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed to be used in life-critical situations and must not be used for this purpose.
-
Page 2: Table Of Contents
V9360W Hemispheric Camera with Advanced WDR Hardware User’s Manual Table of Contents Precautions Introduction Package Contents ................6 Features and Benefits ......Error! Bookmark not defined. Safety Instructions ....... Error! Bookmark not defined. Physical description ................. 7 Installation Procedure Connecting the IP Hemispheric Camera ........10 Remove the cover .............. -
Page 3: Precautions
V9360W Hemispheric Camera with Advanced WDR Hardware User’s Manual Precautions Read these instructions Read all the safety and operating instructions before using this product. Heed all warnings Adhere to all the warnings on the product and in the instruction manual. Failure to follow the safety instruction given may directly endanger people, cause damage to the system or to other equipment. - Page 4 V9360W Hemispheric Camera with Advanced WDR Hardware User’s Manual Safety Instructions Don’t use the power supply with other voltages This device is likely to be damaged or damage other equipments/personnel, if you use a power supply with different voltage than the one included with this device. All warranty of this product will be voided if this occurs.
- Page 5 V9360W Hemispheric Camera with Advanced WDR Hardware User’s Manual Damage Requiring service Disconnect this video product from the power supply immediately and refer servicing to qualified service personnel under the following conditions. 1) When the power-supply cord or plug is damaged 2) If liquid has been spilled, or objects have fallen into the video product.
-
Page 6: Introduction
V9360W Hemispheric Camera with Advanced WDR Hardware User’s Manual 1. Introduction Package Contents H.264 4-Megapixel IP D/N Outdoor Hemispheric Camera with Advanced WDR Terminal Blocks for Power, DI/O, Audio Accessories Drill Template... -
Page 7: Physical Description
V9360W Hemispheric Camera with Advanced WDR Hardware User’s Manual Physical Description Audio Input/Output 12 VDC Power Input Ethernet Port Digital Input/Output Reset Button Micro SDHC Card Slot Power Button 1) 12 VDC Power Input Connect DC power source to the terminal block. The wire with white dashed lines is the live wire, which should connect to the 12 V pin. - Page 8 V9360W Hemispheric Camera with Advanced WDR Hardware User’s Manual 2) Ethernet Port The IP device connects to the Ethernet via a standard RJ-45 connector. Supporting NWAY, this IP device can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet).
- Page 9 V9360W Hemispheric Camera with Advanced WDR Hardware User’s Manual - Digital Input (2) - An alarm input for connecting devices that can toggle between an open and closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. The device will detect the change in digital input and transmit the signal to video surveillance servers.
-
Page 10: Installation Procedure
V9360W Hemispheric Camera with Advanced WDR Hardware User’s Manual 2. Installation Procedure Connecting the IP Hemispheric Camera 1) Remove the cover Remove the dome cover with special hex wrench provided in the accessory kit. 2) Insert the cable There are two conduit holes on the hemispheric camera, one on the bottom and the other on the side. -
Page 11: How To Do The Waterproof Installation
V9360W Hemispheric Camera with Advanced WDR Hardware User’s Manual How to Do the Waterproof Installation The following installation procedure assures the camera to be water-resistant, even in environments where the camera can easily be flooded by pouring rain. Important for the installation: The protection of the cabling must be done by a proper flex conduit. - Page 12 V9360W Hemispheric Camera with Advanced WDR Hardware User’s Manual Screw the body of the conduit gland into the camera and fix it with the lock nut (included with the customer-supplied conduit gland) from the inside of the camera. Connect the Ethernet cable to the camera’s network port. If you are not using PoE, pull the DC power cable through the flex conduit as well and connect to the camera at this point.
- Page 13 A fully waterproof installation is now complete. Using the V9360-WM Wall Mount If it is required to mount the V9360W to a wall, use the V9360-WM. Typical mounting hardware is provided; be sure to use mounting hardware appropriate for the mounting surface.
-
Page 14: Accessing Camera
V9360W Hemispheric Camera with Advanced WDR Hardware User’s Manual 3. Accessing Camera If you have DHCP server/router in your network: Many network server/routers are able to automatically provide IP addresses through DHCP. If you have DHCP on the network, just plug in your computer and IP Hemispheric Camera into the network and your IP device will acquire a network address by itself. - Page 15 V9360W Hemispheric Camera with Advanced WDR Hardware User’s Manual 5. When the login window displays, input default user and password: Default User: Admin Password: 123456 6. After logging in, the Live View will display. To go to the main menu, click the ”Setup”...
- Page 16 V9360W Hemispheric Camera with Advanced WDR Hardware User’s Manual 7. From the Setup Page, select IP Settings -> Connection Type. 8. Change the IP mode to Static. 9. Change the IP to 192.168.0.102 or any other unused IPs. Do NOT use the PC’s IP address or 192.168.0.100.
-
Page 17: Shipping Instructions
Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.) at one of the locations listed below. Record the name of the Vicon employee who issued the R.A. -
Page 18: Vicon Standard Equipment Warranty
“autopan” or “tour” modes of operation. Such continuous operation is outside the scope of this warranty. Any product sold as “special” or not listed in Vicon’s commercial price list: One year from date of original retail purchase. - Page 19 Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-2288 800-645-9116 Fax: 631-951-2288 Vicon Europe Headquarters Brunel Way Fareham, PO15 5TX United Kingdom +44 (0) 1489 566300 Fax: +44 (0) 1489 566322 Vicon Germany Kornstieg 3 D-24537 Neumuenster...
Need help?
Do you have a question about the V9360W and is the answer not in the manual?
Questions and answers