Removing and installing the battery
Only use batteries approved by Fujitsu for your tablet PC.
Never use force when fitting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Never store a battery for longer periods in the discharged state. This
can make it impossible to recharge.
Removing the battery
Please observe the safety information in chapter
Remove the power plug from the mains outlet!
► Switch off the tablet PC.
The device must not be in energy-saving mode.
► Remove all the cables from the device.
► Turn the device over and place it on a stable, flat and clean surface. If necessary, place a
slip-resistant cloth on this surface to prevent the device from being scratched.
► Slide the battery release in the direction of the arrow (1) and hold it in place.
► Slide the battery release in the direction of the arrow (2).
► Lift the battery out of the battery compartment (3).
Fujitsu
3
1
Working with the Tablet PC
"Important notes", Page
2
12.
31