Table of Contents
Advertisement
SIM card (configuration dependent)
A SIM card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or
Tablet PC and, together with an integrated UMTS/LTE module, enables access to a mobile network.
Follow the instructions supplied by the provider of the SIM card.
The SIM card slot is located in the battery compartment and is only
accessible after the battery has been removed.
Please note that the SIM card format must be nano-SIM (4FF). Other SIM
card formats, such as full-size (1FF), mini-SIM (2FF) or micro-SIM (3FF)
do not fit in the SIM card slot of your Tablet PC.
Please do not insert any other format of SIM card as they could
jam or could even damage the system.
Inserting the SIM card
► Remove the battery, see
► Pull the SIM card holder out of the slot (1).
► Insert the SIM card (2) into the SIM card holder as shown in the diagram on the SIM card holder.
► Slide the SIM card holder with the SIM card into its slot (3).
► Install the battery again, see
Fujitsu
"Removing the battery", Page
1
3
"Installing the battery", Page
Working with the Tablet PC
31.
2
32.
35
Advertisement
Table of Contents
