Advertisement
"C
I
NSTRUCTIONS –
ONSOLE
B. SET THE DESIRED TIME or DESIRED DISTANCE
To avoid the user to select TIME and DISTANCE in the same program to confuse the user couldn't distinguish
which one (TIME or DISTANCE) as the first priority. User could only select TIME or DISTANCE in the same
program, one at the time
If you would like to select TIME value, not DISTANCE
value:
UP or DOWN
button:
a.
ENTER
After pressing the
USER MODE PROGRAM (P13 ~ P16)
TIME function mode will appear with the display
flashing "0:00"
b.
UP or DOWN
Use
(1:00 TO 99:00; 1 MINUTE INCREMENT)
NOTE for TIME:
Count Up: If a target time was not selected, TIME
will count up from 0:00 to maximum 99:59 minutes
Count Down: If you have set the target time, the
console will count down from that selected target
time down to 0:00
"C. SET THE DESIRED CALORIES and YOUR
ENTER
button and then
NOTE for CALORIES:
Count Up: If target calories was not selected, this would measure total calories burned during exercise
Count Down: If you have set the preference value of calories, the console will count down from that selected
value down to 0
"D. SET THE DESIRED CALORIES and YOUR
ENTER
button and then
NOTE for AGE:
NOTE: Although the console allows input for ages beginning at 10 years old, the product is not
recommended for children's use
U
button to enter into
buttons to set the desired TIME
UP or DOWN
button:
ENTER
a. Press
button to confirm TIME or DISTANCE value and enter the mode to set the
CALORIES
UP or DOWN
b. Use
buttons to set the desired CALORIES (10 TO 9990KCAL; 10 KCAL
INCREMENT)
UP or DOWN
button:
ENTER
a.
Press
button to confirm the CALORIES value and enter the mode to set the
AGE
UP or DOWN
b.
Use
INCREMENT)
S
SER
ETTING
If you would like to select DISTANCE value, not TIME
value:
ENTER
button and then
a.
After pressing the
USER MODE PROGRAM (P13 ~ P16)
, the
TIME function mode will appear with the display
flashing "0:00"
b.
Press the
function mode will then appear with the display
flashing "0.0"
UP or DOWN
c.
Use
DISTANCE (1 TO 999KM/MILE; 1 KM/MILE
INCREMENT)
NOTE for DISTANCE:
Count Up: If a target distance was not selected,
this would measure the total distance from 0:00 to
999 km/mile
Count Down: If you have set the target distance,
the console will count down from the selected
target time down to 0
AGE"
AGE"
buttons to set your AGE (10 TO 99 YEARS OLD; 1 YEAR OLD
34
P
ROGRAM (P13 ~
UP or DOWN
ENTER
button to enter into
ENTER
button again, the DISTANCE
buttons to set the desired
P16)"
button:
, the
Advertisement
