Setting The Aa Battery Type; Shure Sb903 Rechargeable Battery - Shure SLX D Series Manual

Setting the AA Battery Type

To ensure accurate display of transmitter runtime, set the battery type in the transmitter menu to match the installed AA battery
type (the default setting is Alkaline). If a Shure rechargeable battery is installed, selecting a battery type is not necessary and
the battery type menu will not be displayed.
1. Press the menu button to navigate to the Battery screen.
2. Press enter, then use the menu button to select the installed battery type:
◦ Alkaline = Alkaline
◦ NiMH (nickel metal hydride)
◦ Lithium (non-rechargeable, 1.5V max)
3. Press enter to save.

Shure SB903 Rechargeable Battery

The SB903 lithium-ion rechargeable battery powers the SLX-D transmitters. Use the SBC10-903 single bay or SBC203 dual
bay chargers to recharge SB903 batteries.
Important: Always fully charge a new battery before first use.
To fully charge a new SB903 battery, it must be placed directly in the charger. After the first charge, the battery can be charged
by docking the transmitter in the SBC203 dual-bay charging station.
Single Bay Charger
The SBC10-903 single bay charger offers a compact charging solution.
1. Plug the charger into an AC power source or USB port.
2. Insert a battery into the charging bay.
3. Monitor the charging status LEDs until charging is complete.
Shure Incorporated
17/43