Putting The Components Into Operation - Sennheiser Tourguide 2020-D Instruction Manual

Putting the components into operation

Inserting and replacing the batteries/accupack of the
bodypack transmitter
For powering the bodypack transmitter, you can either use the rechargeable
BA 2015 accupack 5
rechargeable batteries!
Push the two battery compartment catches
partment cover 4�
Insert the BA 2015 accupack
the left� Please observe correct polarity when inserting the accupack/ bat-
teries�
Close the battery compartment cover 4�
14
Connecting a microphone to the bodypack transmitter
Note: Suitable Sennheiser microphones are listed on page 80�
Connect the microphone to the microphone input
mitter�
Lock the plug by screwing down the coupling ring�
Adjust the sensitivity of the microphone input as described on page 127�
Putting the components into operation
or two 1�5 V AA size batteries� NB: Do not use any other
5
or the batteries as shown in the diagram on
4
14
3
14 and open the battery com-
5
3 of the bodypack trans-
Tourguide 2020-D | 101